Our specially designed CORECLAD®® lead lined wood doors can be furnished with 20 minute neutral or positive pressure labels for doors with lead thickness up to 3/8″. The amount of lead required in these doors must be determined by a licensed radiation shielding physicist.
- 20 Minute NP – Neutral Pressure
- 20 Minute PP – Positive Pressure Category A
- 20 Minute PPFM – Positive Pressure Category B
- Single Door: 4’0” x 8’0”
- Pairs: 8’0” x 8’0”
|Lead Thickness||Door Thickness||3070 Weight (Pounds)||4070 Weight (Pounds)|
- Standard CORECLAD®® Particle Board Core
- SCL CORECLAD®® Core
- No Added Urea Formaldehyde CORECLAD®® Particle Board Core
- Veneer – All species available
- No Added UF as an option
- Plastic Laminate
Butt Hinges – Due to the heavy weight of the lead lined doors, we recommend that Pivots or Continuous Hinges be used. However we will allow butt hinges as long as they are rated for the weight of the door.
Locks/Strikes & Flushbolts:
Mortise / Cylindrical – Hospital Latch included
Surface Vertical Rods / RIM Exit Devices – (Concealed Vertical Rods are not allowed)
Top & Bottom Flush bolts & Fire Pins
Raceway / EPT (only available within the bottom 40” of door) / Magnetic Switches
Additional preps are available.
Lite sizes are available up to 1,296 square inches per leaf with lead requirements up to 1/8”. Total area of cutout cannot exceed 40 percent of door area (30” wide or 54” high maximum). Lite cutout must be at least 5” from any edge or any hardware cutout. Lites must be double glazed with one piece of fire rated glass & one piece of lead glass. Glass thicknesses must be given at time of order.